Skip to main content

Treacle To Tough: How To Harden Asphalt Millings?

By June 23, 2022April 11th, 2023No Comments
AAA Paving workers hardening asphalt millings.

When you think of driveways, the first thing that comes to mind is asphalt. It’s black, smooth, and easy to maintain. But what happens when the driveway starts to crack and crumble? You can patch it up, but eventually, it’ll need a new surface. The traditional way to fix this problem is by paving over the old asphalt with fresh material.

But what if there was a cheaper and easier alternative? You could use millings! Asphalt millings are a popular paving material for driveways and parking areas. The mixture of blacktop and gravel is less expensive than asphalt, and it can be installed over most surfaces without preparation. However, the millings can become pitted and rough after time, making them difficult to walk on or drive on.

AAA Paving Since 1964 LLC is one of the best for looking for asphalt paving or asphalt milling services due to its experience and professionalism. This blog post will describe how to harden asphalt millings to stay looking great for years to come!

What is Asphalt Milling?

Asphalt milling is removing the top layer of asphalt from a street, parking lot, or driveway. This process reveals the asphalt underneath, which can be repaired or replaced if necessary. Asphalt milling is a cost-effective way to repair roads and surfaces without repaving the entire area.

Harden Asphalt Millings

There are a few different ways to harden asphalt millings:

  • The most common way is to add an emulsion or liquid asphalt to the millings. It will bind the millings together and create a new surface.
  • Another way is to compact the millings with a roller. It will also bind the millings together and create a new surface.
  • A third way is to heat the milling, which will cause them to harden and bind together. This method is usually used for larger projects, such as highways.

No matter which method you choose, you’ll need to compact the millings for them to harden properly. Compaction can be done with a hand tamper, a plate compactor, or a roller. Once the millings are compacted, they should be left to cure for 24-48 hours before being used.

Benefits of Hardening Asphalt Millings

Hardening asphalt millings will make the surface more robust and more durable. It will also extend the life of the asphalt and prevent it from deteriorating as quickly. That will save you on a lot of expenses in the long run because you won’t have to replace the asphalt as often.

Hardening asphalt millings also makes it easier to clean. The hard surface will resist staining and be more accessible to power wash if necessary.

If you need a paving contractor, reach out to AAA Paving Since 1964 LLC. With over 50 years of experience, we are sure to get the job done right. And if you have any questions about how asphalt millings can be hardened, don’t hesitate to give them to us. In Conroe and nearby regions, we offer services like asphalt milling, asphalt paving, concrete paving, etc.

Schedule a call today!